BUC-Ku40-9.75 + IP Ctrl

BUC-Ku40-9.75 + IP Ctrl is block up-converter with fixed output power P1dB 40 W (Output Power (P_sat) 46 dBm) and LO of 9.75 GHz.

Our BUC operates with up to 25 carriers and has built-in reference of 10 MHz;

and ALC adjustment level range (nominal) -9 … +4 dB from P_ALC;

+ LED status indication at the rear side.

- +

Input parameters:
Input Frequency range		950 – 1750 MHz (950-1950 MHz by order)
Input impedance		50 Ohm
Input level, max		-15 dBm
Input VSWR, max		1.5
Input interface		N-type Female
ALC range, min		25 dB
Local Oscillator:
LO frequency		9750 MHz (or by order)
LO Phase noise:	@1 kHz	-80 dBc/Hz
	@10 kHz	-85dBc/Hz
	@100 kHz	-100dBc/Hz
LO instability		± 2ppm
Output parameters:
Output frequency range		10700 – 11500 MHz (or by order)
Output Power P_sat		46 dBm
ALC Output Power with adjustment, P_ALC		36 dBm*
ALC adjustment level range (nominal)		-9 … +4 dB from P_ALC
Gain, min		72 dB
IMD3 level at ALC Output Power, max		-37 dBc
Output interface		Waveguide WR75, Flange PBR120
Output VSWR, max		2
Frequency Response:
Flatness over Full Band		±1.5 dB
Spurious:
In-band P_sat, max		-55 dBc
Out-Band, max		-30 dBm
LO leakage at ALC output power, max		-40 dBm
Image rejection, min		60 dB
Power supply:
Input voltage		20 VDC – 55 VDC, nominal 48 VDC
Power consumption, max		< 100 W
Interfaces:
IF input connector: N-type female / RF output connector: WR75 (PBR120)
DC connector: C90-3102R10SL-4P / Monitor & Control connector: UTS014E19P
Monitor & Control: Step level for ALC, Ethernet
LED indicator: Green – OK, blink Green – MUTE, Yellow – AGC active, Red – Alarm
Environmental:
Operating temperature		-30℃ to +55℃
Storage temperature		-40℃ to +70℃
Operating humidity		100%, non‐condensing
Mechanical:
Dimensions		260х135х92mm
Weight, max		5 kg

توثيق

اشترك في نشرتنا الإخبارية