| Parameter name, units |
Nominal value, tolerance |
| Input operating frequency range, MHz |
from 52 to 88 |
| Uneven frequency response in the input operating frequencies range, dB, not more than |
1.0 |
| Frequency adjusting step, kHz |
1 |
| Frequency instability, ppm |
0.01 |
| Spectral density of phase noise power, dBc/Hz, in case of detuning from carrier on:
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
|
-70
-90
-95
-95
-100 |
| Frequency bandwidth at output, MHz |
36 |
| Unequal frequency response in the bandwidth 36MHz at the output range 950 – 2150 MHz, dB, not more than |
5.0 |
| Maximum acceptable level of the input signal (at attenuation 20 dB), dBm |
– 20 |
| The output power level at 1dB compression (P1dB), dBm, not less than |
0 |
| The value of the IMD3 in the presence of two output signals with a power of -13dBm, dBm, not more than |
– 40 |
| Maximum conversion gain, dB, not less than |
50 |
| Depth of the gain factor adjustment due to two attenuators, dB, not less than |
– 50 |
| Step of adjusting the gain factor, dB |
1.0 |
| Impedance of radio frequency input, Ohm |
50 |
| Return losses at the input, dB |
– 18 |
| Management and control mode |
Local and remote |
| Remote mode interface |
Ethernet 10/100 Base T |
| Impedance of output, Ohm |
50 |
| Output VSWR |
1.8:1 |
| Spurious radiation in the working frequency range, dBc, not more than |
– 55 |
| Frequency of reference oscillator, MHz |
10 |
Phase noise of the reference oscillator, dBc/Hz
when detuning from carrier on:
10 Hz
100 Hz
1 kHz
10 kHz
|
-125
-140
-150
-155 |
| AC power supply voltage with frequency of 50 Hz, V |
100 – 262 |
| Power consumed in “hot” redundency mode (1+1), W, no more than |
45 |
| Overall dimensions (without connectors), mm |
482 х 400 х 44 |
| Weight, kg, no more than |
7.0 |
