BUC-C40

BUC-C40 is block up-converter with fixed output power P1dB 40 W. BUC-C40 has LED status indication at the rear side.

- +

Input parameters:
Input Frequency range		950 – 1525 MHz
Input impedance		50 Ohm
Input VSWR, max		1.5
Input interface		N-type Female
Local Oscilator:
LO frequency		4900 MHz
LO Phase noise	@1 kHz	-85 dBc/Hz
	@10 kHz	-95 dBc/Hz
	@100 kHz	-105 dBc/Hz
Output parameters:
Output frequency range		5850 – 6425 MHz
Output Power @P1dB, min (GaAs)		40 W (46 dBm)
Gain, min		66 dB
IMD3 (two tones)		-25 dBc max 2 signal 5 MHz apart at @P1dB
Output interface		WR137-G (Waveguide Flange)
Output VSWR, max		2.0:1
Frequency Response:
Flatness over Full Band		±2 dB (4 dB p-p max)
Gain flatness 40 MHz		± 0.5 dB
External frequency		10 MHz
Power range ref.		-5 dBm to +5 dBm
Spurious:
In-band @P1dB, max		-50 dBc
Out-Band, max		-60 dBc
LO leakage		-40 dBm
Image rejection, min		60 dB
Power Supply:
Input voltage		90-240 VAC, 47-63Hz
Power consumption, max		< 230 W
Environmental:
Operating temperature		-20℃ to +50℃
Operating humidity		0 – 95 %
Interfaces:
IF input connector: N-type female; RF output connector: WR137-G
AC connector: PQ14-3; Monitor & Control connector: FQ24-19
Monitor & Control: Serial RS-232, Step Attenuator, Ethernet
LED indicator: Green – OK, Red – Alarm, blink Yellow – MUTE
Mechanical
Dimensions		260x135x92 mm
Weight, max		4.7 kg

توثيق

اشترك في نشرتنا الإخبارية