HD Encoder + ASI Transcoder

HD Encoder + ASI Transcoder + IP streamer is multifunctional professional studio/head-end device with integrated MPEG-4 / MPEG-2 digital compression algorithms. It has 2 independent encoders / transcoders with 2 SD / HD SDI, HDMI, CVBS, ASI inputs and can be used both as part of IP TV (4 IP outputs MPTS / SPTS) and as a part of head-end station.

Operative modes:

• H.264 / MPEG-2 Encoder with 2 SDI / CVBS / HMDI inputs
• 2 ASI TS transcoder

The HD Encoder is designed to encode SD / HD HDMI / SDI / CVBS signals to MPEG-4 / AVC (MPEG-4 Part 10) standard, which corresponds to ITU-T H.264 standard and the ISO / IEC MPEG-4 Part 10 standard and MPEG-2 standard. In HD and SD modes the encoder can work with the High Profile and MAIN Profile from Level 1 to 4.2.

Using our encoder it is possible to receive simultaneously the same encoded / transcoded programs of high and low resolutions for mobile broadcasting or Internet broadcasting in the output stream.

The mode of “encoder/transcoder” is set in management software.

4 IP and 2 ASI outputs settings of HD Encoder + ASI Transcoder:

• either you set one of input encoded channel to the one output (SPTS)
• or set multiplex – MPTS stream – included both encoded channels.

Transcoding of SD/HD programs in the ASI input streams:

• MPEG-2 (SD/HD) -> MPEG-2 (SD);
• MPEG-2 (SD/HD) -> H.264 (SD/HD);
• H.264 (SD/HD) -> H.264 (SD/HD);
• H.264 (SD/HD) -> MPEG-2 (SD).

Digital to digital decode and re-encode with minimum loss in video quality.
Supports multi-bitrate transcoding.
In the transcoder mode, you can enable an additional channel. Thus, there are 4 transcoded programs (2 transcoded programs from each transcoder) will be in the output stream.

There is integrated color-bar generator with the sound in HD Encoder + ASI Transcoder. It can be enabled and disabled in control software.

The one more feature which is most important is ability to work with low signal delay up to 100 ms (low delay mode (optional)).

 KEY FEATURES:

• Transcoding of an SD/HD program
• The possibility of 2 audio channels transferring in the first coder
• Supports OTA, EPG, DVCrypt CAS 3000/10000/100000 subscribers in transcoder
• 2 HDMI / 2 SDI / 2 CVBS / 2 ASI inputs
• Software input signals switching
• Maximum output bitrate of 15 Mbit/s per channel
• IP outputs. 4 independent addresses. RTP, UDP protocols, multicast, unicast
• Overlaying titles on the input signal
• High Profile and Main Profile modes
• Encoding: MPEG-2 HP@HL, MP@HL , MP@ML; MPEG-4 H.264 HP@L4, MP@L3
• Transcoding: MPEG-2 -> MPEG-4, MPEG-2 -> MPEG-2, MPEG-4 -> MPEG-2, MPEG-4 -> MPEG-4
• Selectable MPEG-2 SD or H.264 SD/HD real-time video encoding
• User selectable resolution and bitrate
• The ability to upgrade via Ethernet
• The ability to enable the test signal (color-bar generator) with the sound