2165

8ch with CI slots DVB-S2 IRD v2.0

Short description

8 channel with CI slots DVB-S2 IRD v2.0 is multichannel Professional Integrated Receiver and Descrambler designed for high-quality TV broadcasting. It can demodulate and descramble up to 8 channels by integrated 8 DVB-S/S2 satellite tuners with CI slots.

- +
  • Description
  • Downloads

KEY FEATURES:

  • 8 independent DVB-S / S2 receivers with built-in CI (Common Interface)
  • 8 DVB-CI slots support multi-program decryption
  • 8 ASI outputs 
  • built-in 1Gbit IP streamer (supports 64 SPTS or 8 MPTS)
  • Management via WEB interface

8ch with CI slots DVB-S2 IRD v2.0 is professional receiver which includes 8 independent DVB-S/S2 receivers with integrated CI (Common Interfaces) and supports multi-program decryption (descrambling, MSD).

8ch with CI slots DVB-S2 IRD v2.0 has ASI outputs which allow to use IRD with external DVB multiplexers, modulators and other digital TV equipment for streaming and broadcasting. Each ASI output corresponds to respective DVB-S/S2 input.

Built-in 1Gbit IP streamer supports DVB-over-IP protocol. You may organize IPTV broadcasting of up to 64 SPTS or 8 MPTS due to obtaining streams from 8 DVB-S2 receiver. IP streamer supports Unicast and/or Multicast transmitting technologies.

The powerful functions and features of the 8 channel with CI slots DVB-S2 IRD v2.0 with our multiplexers, modulators, scramblers, BUC, antennas, etc. allow you to organize the DVB TV head-end for SD, HD and UHD (4k) channels broadcasting by RF and/or by IP.
8ch with CI slots DVB-S2 IRD v2.0 is controlled by WEB interface.
The 8 channel with CI slots DVB-S2 IRD v2.0 has 1U dimensions for mounting in standard 19” telecommunication rack.

Thus you can replace 8 independent receivers with only one 8-channel with CI slots DVB-S2 IRD, saving place in rack, obtaining compact and high-performance receiving part (working 24/7) with a lot of additional integrated modules.

DVB-S / S2 receiver inputs
Channels quantity 8
Input frequency range, MHz 950-2150
Input signal level, dBm -65 … -25
Nominal input impedance, Ohm 75
Connector type IEC, F-type
Modulation QPSK, 8PSK, 16APSK
Symbol rate, Msymb/s 1-45 (for QPSK, 8PSK), 1-36 (for 16APSK)
FEC auto, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 6/7, 7/8, 8/9, 9/10
LNB Power Parameters 13/18 V, 400 mA max.
Common interface
CI slots quantity 8
Standard EN50221, ETSI TS 101699
DVB-ASI outputs
Quantity 8
Standard EN 50083-9
Output impedance, Ohm 75
Connector type IEC 169-8, BNC-type
Operation modes Packet, 188 byte
Maximum output bit-rate, Mbps 213
DVB-over-IP
Standard ETSI TS 102034
IP streaming protocols RTP, UDP
Max. number of multicast streams 64 SPTS or 8 MPTS
Max. number of unicast connections 8 MPTS
Network interface RJ45 1Gbit Ethernet

8ch with CI slots DVB-S2 IRD v2.0 is a professional-grade integrated receiver decoder designed for satellite television reception, descrambling and IP streaming. It combines eight independent DVB-S/S2 tuners with eight CI (Common Interface) slots, allowing multi-program decryption (MSD) and high-performance signal processing. Supporting QPSK, 8PSK and 16APSK modulation types, this IRD provides stable operation across a wide 950–2150 MHz input frequency range.

With ASI and 1Gbit IP outputs, the 8ch with CI slots DVB-S2 IRD v2.0 enables seamless integration with multiplexers, modulators and IPTV broadcasting equipment. The built-in IP streamer supports up to 64 SPTS or 8 MPTS transport streams using UDP or RTP protocols in Unicast or Multicast mode. Web interface management and CI slot compatibility with major CAS systems make it ideal for professional satellite headends and broadcasting centers.

Multi-channel professional DVB-S2 receiver decoder

Equipped with 8 independent DVB-S/S2 tuners, the IRD receives multiple satellite channels simultaneously. Each tuner has its own ASI output for direct integration with multiplexers or other DVB processing modules. This allows broadcasters to consolidate eight separate receivers into one high-efficiency device.

Integrated multi-program descrambling with CI slots

Eight Common Interface slots compliant with EN50221 enable the use of CAM and CAS modules for professional content protection and conditional access. The IRD supports multi-program descrambling, ensuring simultaneous decryption of multiple channels with flexible and secure digital TV distribution.

IP streaming and ASI output capability

The device supports DVB-over-IP with both Unicast and Multicast transmission. Up to 64 SPTS or 8 MPTS can be streamed directly over the network via 1Gbit Ethernet, while ASI outputs maintain compatibility with existing DVB systems for hybrid RF/IP operation.

Compact and efficient 1U rackmount design

The 8ch with CI slots DVB-S2 IRD v2.0 fits into a standard 19″ rack, replacing multiple standalone receivers. With efficient use of space and stable 24/7 operation, it is suitable for professional broadcast facilities and headend installations.

🛠️ Whether you need a multi-channel DVB-S2 integrated receiver decoder, a satellite IRD with CI slots for descrambling, or a professional ASI and IP output solution for broadcast headends, the 8ch with CI slots DVB-S2 IRD v2.0 is built for reliable, high-density signal reception and distribution.

🛒 The 8ch with CI slots DVB-S2 IRD v2.0 is available for purchase and OEM integration. It is in stock, ready for integration and available by order for professional broadcasting infrastructure.

📌 Key features

  • 8 independent DVB-S2 tuners with CI slots

The 8ch with CI slots DVB-S2 IRD v2.0 includes eight separate DVB-S/S2 tuners, each paired with a dedicated CI slot for multi-program descrambling. This configuration allows simultaneous decoding of multiple encrypted channels and is suitable for large-scale satellite distribution systems.

  • Wide frequency range 950–2150 MHz

The IRD covers the full L-band range for professional satellite reception. It supports QPSK, 8PSK and 16APSK modulation types, ensuring flexibility and stable signal handling under varying satellite conditions.

  • High-performance ASI and IP outputs

Each tuner provides an independent ASI output for direct connection to DVB multiplexers or modulators. The built-in 1Gbit Ethernet interface enables IP streaming via UDP and RTP protocols, ensuring compatibility with hybrid broadcast networks.

  • Advanced IP streaming engine

The internal IP streamer supports DVB-over-IP operation and handles up to 64 SPTS or 8 MPTS streams. It works in both Unicast and Multicast mode, allowing seamless IPTV and OTT broadcasting from a single IRD.

  • Multi-program descrambling and CAM support

The eight CI slots accept CAM modules compliant with EN50221 and support multi-program descrambling. The IRD is compatible with major CAS systems such as Conax, Irdeto and Viaccess.

  • Web interface management and monitoring

The IRD is managed through a web interface for complete configuration and monitoring. Engineers can remotely control IP streaming, ASI outputs and CI modules, simplifying maintenance in professional setups.

⚙️ Main functions

  • Professional satellite signal reception and decoding

The 8ch with CI slots DVB-S2 IRD v2.0 receives satellite signals across 950–2150 MHz, demodulates QPSK, 8PSK and 16APSK signals and outputs clean transport streams. Each channel can operate independently or in a multi-service configuration.

  • Multi-program descrambling with CI-based access

Eight CI interfaces enable decryption of multiple encrypted channels simultaneously. The IRD supports standard CAM modules and conditional access systems, ensuring secure and efficient content delivery for professional broadcasting.

  • DVB-over-IP and ASI signal output

The device transmits decoded transport streams via ASI outputs and IP network simultaneously. The 1Gbit Ethernet port supports UDP and RTP protocols with multiple stream configurations for hybrid RF/IP signal distribution.

  • Integrated network management

Configuration and monitoring are performed through a web interface accessible via Ethernet. Operators can adjust parameters, monitor signal quality and manage CI slots remotely for centralized control in large installations.

  • Compact 1U rackmount design for space efficiency

The device fits into standard 19” racks, reducing equipment footprint and simplifying cabling. Its robust construction supports continuous 24/7 operation in high-density professional headend environments.

🧩 Applications

  • Professional satellite headend systems

The IRD is used in digital satellite headends for receiving and descrambling multiple DVB-S/S2 signals. It enables simultaneous ASI and IP output for redistribution and helps streamline professional broadcasting infrastructure.

  • IPTV and hybrid broadcast networks

The device is suitable for IPTV gateways and DVB-over-IP applications requiring stable IP streaming. It supports Unicast and Multicast transmission for flexible content delivery in professional IP broadcasting environments.

  • Cable and terrestrial re-broadcasting

The IRD integrates with DVB-C and DVB-T/T2 modulators for retransmission of satellite content. It provides stable, high-quality transport stream outputs suitable for multi-network broadcasting.

  • OEM and custom broadcast solutions

The unit is suitable for OEM developers building modular, high-performance IRD systems. It combines multi-channel reception, descrambling and IP streaming in one device for professional broadcast applications.

💡 Why you should buy from us❓

  • 1.5 years warranty
  • 7 years after-sales support
  • Remote support team of engineers
  • Discount program for regular customers 🎁

💬 Contact Us

For additional details or assistance regarding the 8ch with CI slots DVB-S2 IRD v2.0, feel free to contact our team. We provide professional consultation and aftersales support to help with installation and setup, ensuring you get the most out of your broadcasting equipment.

Taking into consideration that we (UMT LLC) are developer and system integrator, also do not stop on our technical growth and improvement, know that view of all our devices and equipment including their technical parameters may be different from pictures presented on website and parameters listed on each device webpage.
Note! All details customer has to confirm in advance during ordering and before payment. Those parameters that were not specified and / or were not agreed while ordering will be implemented as basic at the discretion of the manufacturer. Each our customer has 1.5 year warranty and 7 year aftersales support for whole range of our products.

Documentation