2192

BUC-Ku40-9.75 + IP Ctrl

Short description

BUC-Ku40-9.75 + IP Ctrl is block up-converter with fixed output power P1dB 40 W (Output Power (Psat) 46 dBm) and LO of 9.75 GHz.

Our BUC operates with up to 25 carriers and has built-in reference of 10 MHz;

and ALC adjustment level range (nominal) -9 … +4 dB from PALC;

LED status indication at the rear side.

- +
  • Description
  • Downloads

BUC-Ku40 is designed for MVDS TV broadcasting systems application in accordance with DVB-S/S2 and operates with up to 25 carriers. BUC-Ku40 has output flange of PBR120 type and can be used with regular radio-relay link or broadcast antennas. BUC-Ku40 supports all modulation types up to 32APSK. BUC-Ku40 has the best linearity parameters to ensure the stability of the output frequency and low IMD3 level (these parameters are very important for high quality modulation, therefore the local oscillator of BUC-Ku40 is locked by PLL with internal frequency reference).

LO: 9.75 GHz    IN: 950-1750 MHz    OUT: 10.7-11.5 GHz

KEY FEATURES:

  • Output flange: PBR120
  • Output power (Psat, min): 40 W
  • Any LO frequency by order: 8.8, 9.75, 10.6, 10.75, 10.8, 11.3, 11.8, 12.8, 13.05 (or other by request)
  • Output frequency range: any 800-1000 MHz in Ku-band (10-15 GHz) by order
  • Input frequency range: 950 – 1750 MHz (950-1950 MHz by order)
  • Gain (min): 71 dB
  • Highly stable internal frequency reference
  • LO is locked by PLL with internal frequency reference
  • IMD3 level at ALC output power (the lowest value): -37 dBc max
  • Operates with up to 20 carriers
  • Supported modulation types: up to 32APSK
Input parameters:
Input Frequency range 950 – 1750 MHz (950-1950 MHz by order)
Input impedance 50 Ohm
Input level, max -15 dBm
Input VSWR, max 1.5
Input interface N-type Female
ALC range, min 25 dB
Local Oscillator:
LO frequency 9750 MHz (or by order)
LO Phase noise:
@1 kHz -80 dBc/Hz
@10 kHz -85dBc/Hz
@100 kHz -100dBc/Hz
LO instability ± 2ppm
Output parameters:
Output frequency range 10700 – 11500 MHz (or by order)
Output Power Psat 46 dBm
ALC Output Power with adjustment, PALC 36 dBm*
ALC adjustment level range (nominal) -9 … +4 dB from PALC
Gain, min 72 dB
IMD3 level at ALC Output Power, max -37 dBc
Output interface Waveguide WR75, Flange PBR120
Output VSWR, max 2
Frequency Response:
Flatness over Full Band ±1.5 dB
Spurious:
In-band Psat, max -55 dBc
Out-Band, max -30 dBm
LO leakage at ALC output power, max -40 dBm
Image rejection, min 60 dB
Power supply:
Input voltage 20 VDC – 55 VDC, nominal 48 VDC
Power consumption, max < 100 W
Interfaces:
IF input connector N-type female
RF output connector WR75 (PBR120)
DC connector C90-3102R10SL-4P
Monitor & Control connector UTS014E19P
onitor & Control Step level for ALC, Ethernet
LED indicator: Green – OK
blink Green – MUTE
Yellow – AGC active
Red – Alarm
Environmental:
Operating temperature -30℃ to +55℃
Storage temperature -40℃ to +70℃
Operating humidity 100%, non‐condensing
Mechanical:
Dimensions 260х135х92 mm
Weight, max 5 kg

BUC-Ku40-9.75 + IP Ctrl is a 40 W Ku-band Block Upconverter designed for large-scale DVB-S/S2 uplinks, MVDS broadcasting and teleport applications. With its PLL-locked 9.75 GHz LO, 10 MHz internal reference and powerful solid-state design, this Ku-band BUC transmitter delivers exceptional frequency stability, low phase noise and high spectral purity for advanced broadcasting infrastructures.

With 40 W output power (Psat 46 dBm), 72 dB gain and ALC adjustment from −9 to +4 dB, the BUC-Ku40-9.75 + IP Ctrl is engineered to provide strong, stable and linear amplification for multi-carrier DVB-S/S2 operations. It supports up to 25 carriers, ensuring reliable transmission across demanding broadcast and teleport systems.

This high-power Ku-band BUC integrates optional IP Control via Ethernet and offers advanced LED diagnostics, making it ideal for managed network environments. With IMD3 ≤−37 dBc, spurious ≤−55 dBc and phase noise down to −100 dBc/Hz, the BUC-Ku40-9.75 + IP Ctrl ensures crystal-clear DVB-S/S2 signals, even in dense multi-channel networks.

Engineered for outdoor deployment

The BUC-Ku40-9.75 + IP Ctrl is built into a rugged, weatherproof housing designed for outdoor Ku-band satellite transmission. Featuring an IP65 enclosure, WR75 flange RF output and N-type IF input, it withstands extreme environmental conditions while maintaining full performance.

With support for up to 25 carriers

This multicarrier Ku-band BUC transmitter handles up to 25 DVB-S/S2 carriers simultaneously, maintaining clean, linear performance for MVDS networks, teleport hubs and high-capacity repeaters.

40 W solid-state design with IP control

With 40 W Psat (46 dBm), the BUC-Ku40-9.75 + IP Ctrl offers a high-power output in a compact, solid-state form. The integrated IP Control and LED status monitoring enhance reliability, making it ideal for system integrators requiring smart and managed outdoor Ku-band BUC solutions.

🛠️ Whether installed in large DVB-S/S2 teleports, regional broadcast repeater stations, or mobile uplink systems, the BUC-Ku40-9.75 + IP Ctrl is optimized for performance, efficiency and control.

🛒 Available now, the BUC-Ku40-9.75 + IP Ctrl is ready to deploy in any Ku-band uplink system where high RF power, outdoor readiness and advanced control are critical.

📌 Key features

  • 40 W solid-state Ku-band BUC-Ku40-9.75 + IP Ctrl

Provides 40 W RF output power (Psat 46 dBm) with high efficiency, making it a robust transmitter for teleports and DVB-S/S2 uplinks.

  • PLL-locked 9.75 GHz LO with ±2 ppm stability

The BUC-Ku40-9.75 + IP Ctrl uses a high-stability LO, ensuring precision frequency conversion and minimal phase noise.

  • 72 dB gain with ALC adjustment

With 72 dB gain and an ALC adjustment range of −9…+4 dB, the BUC-Ku40-9.75 + IP Ctrl provides flexibility for system integrators.

  • Integrated 10 MHz reference

Built-in frequency reference guarantees tight synchronization in Ku-band BUC integrations for DVB-S/S2 networks.

  • Ethernet/IP Control and LED indication

The BUC-Ku40-9.75 + IP Ctrl supports remote monitoring, AGC/ALC control and advanced LED diagnostics for managed networks.

  • High linearity and low distortion

IMD3 ≤−37 dBc and spurious ≤−55 dBc make the BUC-Ku40-9.75 + IP Ctrl a high-linearity Ku-band BUC suitable for multi-carrier uplinks.

  • Low phase noise performance

−80/−85/−100 dBc/Hz at 1/10/100 kHz ensures clean DVB-S/S2 signals even with complex modulation schemes.

  • Compact and rugged outdoor build

At just 5 kg, the BUC-Ku40-9.75 + IP Ctrl is lightweight yet protected by IP65 housing, ensuring reliable outdoor deployment.

⚙️ Main functions

  • IF-to-Ku frequency upconversion

The BUC-Ku40-9.75 + IP Ctrl converts 950-1750 MHz IF signals into Ku-band outputs (10.7-11.5 GHz), enabling reliable DVB-S/S2 broadcasting.

  • Automatic output power leveling (40 W output)

Integrated ALC ensures stable output power of up to 40 W, protecting transmission quality across variable input conditions.

  • Precision with PLL LO and internal reference

The PLL-locked LO and built-in 10 MHz reference keep the BUC-Ku40-9.75 + IP Ctrl stable, even in long-term 24/7 deployments.

  • High-linearity amplification

Designed for multi-carrier DVB-S/S2 uplinks, the BUC-Ku40-9.75 + IP Ctrl maintains signal purity with low IMD3 distortion.

  • Spurious filtering and clean output spectrum

Advanced filtering ensures the BUC-Ku40-9.75 + IP Ctrl delivers clear RF output, suitable for critical broadcast chains.

  • Smart monitoring and IP control

With Ethernet management and LED diagnostics, the BUC-Ku40-9.75 + IP Ctrl is an intelligent outdoor Ku-band BUC for modern networks.

🧩 Applications

  • Large-scale DVB-S/S2 teleports

The BUC-Ku40-9.75 + IP Ctrl provides the high output power required for regional and international Ku-band teleports.

  • MVDS broadcasting systems

As a MVDS block upconverter, the BUC-Ku40-9.75 + IP Ctrl supports multi-channel terrestrial distribution.

  • TV repeater and rebroadcast stations

The BUC-Ku40-9.75 + IP Ctrl ensures stable, high-power Ku-band retransmission for large TV networks.

  • VSAT and DSNG uplinks

With 40 W RF power, the BUC-Ku40-9.75 + IP Ctrl provides reliable connectivity for VSAT terminals and DSNG vans.

  • OB vans and mobile broadcast units

Compact, powerful and IP65-ready, the BUC-Ku40-9.75 + IP Ctrl is an excellent choice for mobile uplink solutions.

  • OEM integration into high-power systems

The BUC-Ku40-9.75 + IP Ctrl fits modular broadcast cabinets where compact, high-power Ku-band amplification is required.

  • Outdoor Ku-band deployments

With an operating range of −30℃ to +55℃, the BUC-Ku40-9.75 + IP Ctrl is optimized for harsh environmental conditions.

  • Managed network environments with IP control

The BUC-Ku40-9.75 + IP Ctrl integrates Ethernet-based monitoring and diagnostics, making it suitable for managed teleports.

💡 Why you should buy from us❓

  • 1.5 years warranty
  • 7 years after-sales support
  • Remote support team of engineers
  • Discount program for regular customers 🎁

💬 Contact Us

For additional details or assistance regarding the BUC-Ku40-9.75 + IP Ctrl, feel free to contact our team. We provide professional consultation and aftersales support to help with installation and setup, ensuring you get the most out of your broadcasting equipment. BUC-Ku40-9.75 + IP Ctrl is available to customize its parameters by order.

Taking into consideration that we (UMT LLC) are developer and system integrator, also do not stop on our technical growth and improvement, know that view of all our devices and equipment including their technical parameters may be different from pictures presented on website and parameters listed on each device webpage.
Note! All details customer has to confirm in advance during ordering and before payment. Those parameters that were not specified and / or were not agreed while ordering will be implemented as basic at the discretion of the manufacturer. Each our customer has 1.5 year warranty and 7 year aftersales support for whole range of our products.

Documentation