The 200W C-band BUC is a rugged, compact solid state amplifier (SSPA) with integrated block up converter (BUC) suitable for fixed and mobile satellite communications with high data rate or multicarrier requirements. The 200W C-band BUC is an outdoor, environmentally sealed product that can be mounted close to the antenna feed to reduce waveguide loss.
KEY FEATURES:
- Outdoor SSPA with integrated BUC
- Compact, Lightweight Package
- M&C capability via RS232, Ethernet
- High linearity
| Input parameters: |
| Input Frequency range |
950 – 1525 MHz |
| Input impedance |
50 Ohm |
| Input VSWR, max |
1.5 |
| Input interface |
N-type Female |
| Local Oscillator: |
| LO frequency |
4900 MHz |
| LO Phase noise: |
@1 kHz |
-75 dBc/Hz |
| @10 kHz |
-85 dBc/Hz |
| @100 kHz |
-95 dBc/Hz |
| Output parameters: |
| Output frequency range |
5850 – 6425 MHz |
| Output Power (GaN) |
Psat |
53 dBm |
| Plinear |
50 dBm |
| Gain, min |
76 dB |
| IMD3 (two tones) |
-25 dBc max 2 signal 5 MHz apart at Plinear |
| Output interface |
WR137-G (Waveguide Flange) |
| Output VSWR, max |
2.0:1 |
| Frequency Response: |
| Flatness over Full Band |
±2 dB (4 dB p-p max) |
| Gain flatness 40 MHz |
± 0.5 dB |
| External frequency |
10 MHz |
| Power range ref. |
± 5 dBm |
| Spurious: |
| In-band Plinear, max |
-50 dBc |
| Out-Band, max |
-60 dBc |
| LO leakage, max |
-40 dBm |
| Image rejection, min |
60 dB |
| Power Supply: |
| Input voltage |
110 – 265VAC, 47-63Hz |
| Power consumption, max |
< 800 W |
| Environmental: |
| Operating temperature |
-20℃ to +50℃ |
| Operating humidity |
0 – 95 % |
| Interfaces: |
| IF input connector: N-type female; RF output connector: WR137-G |
| AC connector: PQ14-3; Monitor & Control connector: FQ24-19 |
| Monitor & Control: Serial RS-232, Step Attenuator, Ethernet |
| LED indicator: Green – OK, Red – Alarm, blink Yellow – MUTE |
| Mechanical: |
| Dimensions |
333x155x121 mm |
| Weight, max |
11 kg |
