Ku-band LNB PLL dual LO 9.75 10.6 v.2 is Low Noise Block Down Converter which is designed for RF signals gaining and transforming from Ku-band to L-band (intermediate frequencies). The Ku-band LNB PLL dual LO 9.75 10.6 has a waterproof case. Ku-band LNB PLL dual LO 9.75 10.6 could be mounted in close proximity to antenna. Ku-band LNB PLL dual LO 9.75 10.6 v.2 has input flange PBR120 and could be used with regular RRL or receiving antennas.
KEY FEATURES:
- Dual independet output (LB and HB)
- Flange PBR120 input
- Output power P1dB: 0 dBm
- Input frequencies:
LB: 10.7 – 11.7 GHz, HB: 11.7 – 12.75 GHz
- Output frequencies:
LB: 950 – 1950 MHz, HB: 1100 – 2150 MHz
- Min. gain: 55 dB typ.
- LO stability (over temp.): ± 2.5 ppm
- Operating temp.: -30℃ … +60℃
- Oscillator type: PLL
Input parameters: |
Input Frequency range |
LB: 10.7-11.7 GHz; HB: 11.7-12.75 GHz |
Input level, max |
-60 dBm |
Input VSWR, max |
2 |
Input interface |
Waveguide WR75, Flange PBR120 |
Local Oscilator: |
LO frequency |
LB: 9.75 GHz; HB: 10.6 GHz |
LO Phase noise: |
@1 kHz |
-73 dBc/Hz |
@10 kHz |
-83 dBc/Hz |
@100 kHz |
-95 dBc/Hz |
LO instability |
± 2 ppm (± 1 ppm by request) |
Output parameters: |
Output frequency range |
LB: 950-1950 MHz; HB: 1100-2150 MHz |
Output Power @P1dB |
0 dBm |
Gain, min |
55 dB |
Output interface |
N-type female |
Output impedance |
50 Ohm |
Output VSWR, max |
2 |
Frequency Response: |
Flatness over Full Band |
±2 dB |
Flatness over 27MHz Band |
±0.75 dB |
Spurious: |
Noise Figure (@+25℃) |
0.8 dB max |
LO leakage, max |
-50 dBm |
Image rejection, min |
50 dBc |
Power supply: |
Input voltage |
13 – 18 VDC, nominal 18 VDC |
Power consumption, max |
3.9 W |
Environmental: |
Operating temperature |
-30℃ to +60℃ (-22℉ to +140℉) |
Storage temperature |
-30℃ to +80℃ (-22℉ to +176℉) |
Operating humidity |
0% – 95% |
Mechanical: |
Dimensions (W x H x D) |
59x41x144 mm |
Weight |
0.44 kg |