Welcome to the UMT official web-site Call us: +38 (044) 332-20-77

2 ch DVB-S-S2 receiver board

  • Description
  • Downloads

2 ch DVB-S-S2 receiver board can be used to design and build various converters, transmodulators and other digital broadcasting equipment together with other our boards:

Thus 2 ch DVB-S-S2 receiver can be the part of:

Management, monitoring and configuration of 2 ch DVB-S-S2 receiver board is provided by TCP/IP using our IP control board.

KEY FEATURES:

  • all types of satellite signal modulations (DVB-S/S2) are supported;
  • small size of the board;
  • low power consumption.

ParameterValue
Modulation types DVB-S, DVB-S2
Modulation parameters DVB-S2 mode
Modulation  QPSK, 8PSK (16APSK and 32APSK are supported in 1 channel mode)
FEC  1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Symbol rate  1 ... 36 Msymb/s, in steps of 1 Ksymb
Roll-Off-Factor  0.2, 0.25, 0.35
Modulation parameters DVB-S mode
Modulation  QPSK
FEC  1/2, 2/3, 3/4, 5/6, 7/8
Symbol rate  1 ... 65 Msymb/s, in steps of 1 Ksymb
RF parameters
Frequency range  950 ... 2150 MHz, in increments of 1 kHz
Signal level   -65 ... -25 dB
Connector type F-type
Impedance  75 Ohm
Output
Signal type parallel transport stream from DVB compatible modules 
Connector type  PLD-34
General  
Control interfaces RS232 (in-built)
TCP / IP (optional with IP-UART control unit)
Front panel (optional with Front panel unit)
Power supply 8 ... 18 V
Power consumption, max 5 W
Dimensions 120x80 mm


Documentation